MAGNA360PROTWIN™ pump system

Magna 360 Pro Twin installation and operating guidepdf file, 207 KB

MAGNA360PROTWIN™ pump system

• Polyethylene tank requires site drilling for connections to suit application.
• Supplied with pedestrian duty cover. Can be adapted for roadway applications using covers by others.
• Vertical output: 8–12.5 m.
• Horizontal output: 70–150 m.
• Flow rate (maximum): 180–450 L/m.
• Requires 230V AC fused electrical supply.
• Requires level concrete base and concrete backfill.

  ---

More about MAGNA360PROTWIN™ pump system

Product reference:	MAGNA360PROTWIN™ pump system.
Type:	[Magna 150 Standard] [Magna 200 Standard] [Magna 360 Pro] [Magna 360 Pro Twin]
Access cover:	[As supplied] [2903, locking, inlay, 600 x 450 mm] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin. [7070, locking, heavy duty, 600 x 450 mm] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin. [Cover specified elsewhere, with ___ mm thick overslab] - Maximum 300 mm slab depth.
Pipe:	[3078, MDPE pipe] - For Magna 150 Standard. [3081, 63 mm MDPE pipe] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin.
Alarm:	[2130, high water level alarm] - Mains operated. For Magna 150 Standard or Magna 200 Standard. [4053, high water level alarm] - Mains or battery operated. For Magna 150 Standard, Magna 200 Standard.
Accessories:	[1205, kiosk control panel housing] - For Magna 360 Pro or Magna 360 Pro Twin. [8001, rubber wall seal 110 mm] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin. [9089, rubber wall seal 110 mm] - For Magna 150 Standard or Magna 200 Standard.

Standard Product Features

General:

• Vertical output (maximum): 12.5 m.
• Horizontal output (maximum): 150 m.
• Flow rate (maximum): 450 L/m.
• As standard: 9400 tank, 2138 access cover, 3060 pumps, 9067 nonreturn valve, 9070 gate valve, 3094 compression fitting, 8001 rubber wall seal, 3107 float switches, 3002 control panel.
• 110 mm cable duct connector. 110 mm vent duct connector.
• Internal dimensions (dia x h): 850 x 1250 mm.
• External dimensions (dia x h): 1000 x 1400 mm.
• Discharge: 63 mm.
• Submersible pump: 5.1 A, 750 W.
• With control panel for remote siting

Installation:

• Base: 200 mm consolidated hardcore. 150 mm mass concrete, grade 25 (minimum), to suit ground conditions.
• Discharge pipe connector: Use with MDPE (medium density polyethylene), or HDPE (high density polyethylene) discharge pipes.
• Vent duct connector: Provide vent to atmosphere (without valve) where incoming waste is not vented.
• Requires concrete backfill after installation.
• Where a concrete overslab is used, it should be designed to distribute applied loads away from the tank.