Basement Living Group (Wykamol Group)
Cellar Conversions, Basement Waterproofing / Basement Conversions
+44 (0) 845 4006666
Make enquiry

Kontract Geotextile

Kontract_Geotextile Exterior basement waterproofing
Wykamol191  Exterior basement waterproofing
Wykamol Geotex product guidepdf file, 1,555 KB

Product code: KGEOTEXT
Roll size: 40 sq/m (2m x 20m)
Colour: Black


Geotex Exterior Basement Waterproofing System

Cavity drain membrane, drainage and accessories for exterior isolation and direction of groundwater at basement walls, for installation prior to backfill.

  • For use in conjunction with separate damp proof membrane.
  • Reduces water pressure and ground movement stress on DPM. Groundwater is filtered by geotextile, enters 8 mm cavity (spaced by integral compression studs) and is directed to drainage at base of wall. Integral backing facilitates movement to prevent damage to DPM (specified separately).
  • Can be used up to 10 m below ground.

Suitable for use with:

  • Permanent Insulation Formwork walls.
  • Wykamol Tecnoseal DPM. (DPM specified separately).
  • Passive water disposal eg sloping ground.
  • Active water disposal systems eg sump and pump.
  • Wykamol sumps and pumps. (Sumps and pumps specified separately).

More about Geotex Exterior Basement Waterproofing System

Product reference: Geotex Kontract Basement Waterproofing System

Hanging (walls):

[Horizontal].- Provide 450 mm vertical lap joints.
[Vertical].- Provide 150 mm horizontal lap joints

Drainage: [Aquadrain 60 mm]. - Perforated ground drain.
[Aquadrain 100 mm]. - Perforated ground drain.
Accessories: [CM Plaster Plug]. - 8 x 70 mm ground for fixings.
[CM Tape]. - For sealing lap joints between Geotex sheets.
[Finishing strip]. - Rigid profiled edging fixed to wall above ground.


Guidance for Geotex Exterior Basement Waterproofing System from Wykamol Group

Membrane

Geotex:

  • Outer layer: LDPE. Low density polyethylene geotextile. Water transmission rate: 100 L/m²/sec.
  • Middle layer: HDPE. High density polyethylene with moulded compression studs. Compression (maximum): 250 kN/m².
  • Inner layer: PP. Polypropylene slip membrane.
  • Fix to CM Plaster Plugs set in wall at 150 mm centres, adjacent to top of primary waterproofing. Finishing strip protects top edge.
  • Overlap membrane joints and tape using CM Tape. Taped joints are not waterproof.
  • Backfill carefully with earth or other sharps-free fill to avoid irregular stress or mechanical damage to membrane. Membrane is held in place by backfill

Drainage

Aqua Drain:

  • 60 mm diameter drainage pipe for perimeter drainage of basements. Designed for drainage of water contained behind Wykamol Cavity Drain Membranes and subsequent diversion to sump.
  • Fully perforated for water ingress. Fitted with continuous geotextile sheath to prevent ingress of particles.
  • Locate Aquadrain below internal floor level. Encapsulate in granular fill.
  • Ensure cavity drain membrane extends to level of Aquadrain or below.

Further Information

GEOTEX Cavity drain membrane for foundation waterproofing

 
Thinking of converting your basement?
 
Brochure
 
Twitter / Facebook
 
Product enquiry
Page updated 2nd May 2012, 14:27
BRICK | instant websites

© 2012 Basement Living Group (Wykamol Group). All rights reserved.
http://basement-living.co.uk/garden-basement/membranes/kontract-geotextile.html

Page updated 2nd May 2012, 14:27

Designed and maintained by Brick technology Ltd.
BRICK | Instant Websites