Condensation surface treatments

General Guides to control mould by Wykamol

Mould Eradication Kit

A full multipurpose kit providing everything you need to deal with mould problems.

Comes supplied with cleaning agents, all equipment and paint additives to treat and clean mould issues in domestic properties.

MCS1 Mould Clear Concentrate

The Wykamol Mould Control System (MCS) is a three-stage treatment for walls, ceilings etc. affected by condensation mould. When our recommendations are followed, and all three stages are completed, surfaces will exhibit excellent resistance to mould growth even under severe condensation conditions.

Typically, full control can be achieved for up to 5 years but this can be extended considerably where moisture control measures are implemented (we are able to advise on issues such as ventilation, insulation and heating control, all of which can reduce the causes of condensation).

MCS 1 Mould Clear Concentrate MSDS February 2009

MCS2 Biobond Stabiliser

Biobond Stabiliser is a ready-for-use biocidal primer for ‘bonding’ plaster etc. surfaces prior to re-decoration.

It contains a deeply penetrating inorganic biocide designed to kill off the ‘roots’ (hyphae) of the mould thereby preventing re-growth underneath freshly applied paint or paper finishes.

MCS 2 Biobond Stabiliser MSDS May 2010

MCS3 Fungicidal Additive

Wykamol Fungicidal Additive is a high quality additive for adding to emulsion paint prior to repainting to prevent future mould growth.

MCS 3 Fungicidal Additive MSDS February 2009

Anti Condensation Paint

A high quality coating recommended for use on areas not subject to abrasion or washing.

Typically this mean ceilings, underside of roofing sheets, ducting, steel building frames, pipe work, and inside cupboards.

Wykamol Anti-condensation paint inhibits condensation by absorbing mositure and improving insulation.